Model Number

HSD-10NF,HSD-20NW,HSD-30HTW,HSD-8WXF,HSD-6MXF, HF9

1. compressor

2. refrigerated compressed air dryer
1). air-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature≤45°C
High inlet temperature≤80°C
Cooling method : Air-cooling
Ambient temperature :≤38°C
Design dew point: 1.7°C
Refrigerant:R-22
Inlet pressure :0.2～1.0MPa
Pressure drop:≤0.02MPa
2). water-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature: ≤45°C
High inlet temperature: ≤80°C
Cooling method: Water-cooling
Design dew point: 1.7°C
Refrigerant: R-22
Inlet pressure: 0.2～1.0MPa
Pressure drop: ≤0.02MPa
Cooling water inlet temperature: ≤32°C
Cooling water inlet pressure: 0.2～0.4MPa

3. Desiccant compressed air dryer
1). Heatless purge desiccant air dryer
Inlet temperature: 0～45°C
Inlet oil content: ≤0.01ppm
Working pressure: 0.6～1.0Mpa
Dew point: ≤-20°C～-70°C
Purge air: ≤12%
Desiccant: activated alumina & molecular sieve
Purge mode: heatless purge
Working method: continuing alternation between two towers
Working periods: T=10～20min.
Control mode: micron computer auto controlling
Installation mode: indoor,non-basement
2). Externally heated purge air dryer
Inlet temperature: 0～45°C
Working pressure: 0.6～1.0Mpa
Dew point: ≤-40°C～-70°C
Purge air: ≤4~6%
Desiccant: activated alumina & molecular sieve
Purge mode: externally heated purge
Working method: continuing alternation between two towers
Working periods: T=120～140min.
Control mode: micron computer auto controlling
Installation mode: indoor,non-basement

4. low dew point combined compressed air dryer
Working pressure: 0.6～1.0Mpa
Pressure drop: ≤0.05Mpa
Inlet temperature: 45°C
Dew point: -40°C～-70°C
Cooling watre temperature: ≤32°C
(water cooling）
Purge air: 3～5%
Control mode: micro-program controller
Installation mode: indoor, non-basement

5. compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
?First stage?two stainless steel orifice tubes provide 10 micron mechanical separation
?Second stage?in-depth fiber media captures solid and liquid particles to 3 micron

2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
?Firt stage?captures larger particles with alternate layers of fiber media and media screen
?Second stage?coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media

3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
?First stage?multiple layers of bonded, blended fiber media for fine coalescence
?Second stage?multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve

4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
?First stage?coated, closed cell foam sleeve acts as pre-filter and flow disperser
?Second stage?multiple layers of matrix blended fiber media for ultra-fine coalescence
?Outer coated, closed cell foam sleeve

5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
?Corrosion resistant inner and outer cores
Two stage filtration
?first stage?a stabilized bed of finely divided carbon particles removes the majority of the oil vapor
?Second stage?multiple layers of fiber media with bonded micro fine carbon particles removes the remaining oil vapor
?Multiple layers of fine media prevent particle migration
?Outer coated, closed cell foam sleeve prevents fiber migration
?Designed for 1000 hour life at rated conditions.

6. high-efficiency compressed air condensor (water-cooling)
Inlet pressure: 0.2～1.0Mpa
Inlet temperature: ≤140°C
Outlet temperature: ≤45°C
Cooling water inlet temperature :≤32°C
Cooling water inlet pressure: 0.2～0.4Mpa

7. Compressed air oil/water separator
Inlet pressure: 0.2～1.0Mpa
Inlet temperature: ≤5°C～65°C
Initial pressure drop: ≤0.005Mpa
Filter route: 5um
Water removal rate: ≥99%
Outlet air oil content: ≤10ppm

8. Germ removal filter
● Adopt 6 grades element which complement with America UPS plastic biology
● Element material is SPF who is good at hydrophobe, precision to be 0.01um. It can filter bacterium, virus & phagocyte.
● O ring seal (silica rubber and fluorine rubber), ensuring to filter air 100%.
● Unique outer heat-resistant polypropylene. It can stand 1400C steam bacterium removal and won?t reduce its precision if repeat sterilizing.
● Stainless steel of housing, polishing of internal, Max. working pressure to be 1.0Mpa.
● Operation temperature ≤800C.

9. Vapor filter
● Element material is made from erodent-resistant, high temperature resistant and light titanium.
● Precision 1um, max. pressure drop 0.030C.
● Max. working pressure: 3000C.
● 316 stainless steel housing, max. working pressure 1.0Mpa.